Jelly Gelly extension gel has a unique jelly-like consistency that doesn't run, yet is easily brushed on and allows for creating the perfect nail architecture with minimal filing. It is designed for nail correction, extensions, repairing damaged nail plates, and cuticle repairs. Due to its viscous and thick consistency, nail modeling with this gel will be easy and fast, even for beginner technicians. After polymerization, it holds the most difficult shape and length, keeping the manicure flawless for a long time.
- Wavelength for polymerization: 380-420 nm
- UV/Led lamp power: 36-48W
- Permissible coating thickness: 0.5 mm at the end / 1 mm at the apex
- Full polymerization: 120 seconds
Features:
- Thick consistency
- Does not cause burning in the lamp, as it is low-temperature
- Excellent arch retention and does not deform
- Acid-free
- Medium pigmentation, covers the free edge
- Suitable for strengthening, extensions, modeling complex shapes, and corrections
- Thixotropic
- Changes its consistency depending on the air temperature: thicker in cold, thinner in warm
- Can be additionally heated to make the gel thinner
- Hard and strong
- Rubber Base LUNAmoon lining is mandatory
- Nail plate filing is required for strengthening with this gel
Application method for RESTORATION:
1. Removal
2. Do not file the nail form, or leave 2 mm of length spare, which will be filed and removed after leveling.
3. Use a 220 grit file to file the nail from the top without strong pressure, lifting the flakes of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. Degrease the nail using Nail Prep LUNAmoon:
- Make two passes
- Use 4 napkins, one napkin per 5 fingers
- First pass: wipe the nail surface
- Second pass: take an orange stick, put a napkin on it, and wipe everything in the cuticle area and sidewalls.
6. Optionally use primers, but if the base for the substrate has sufficient acidity, primers are not needed.
7. Apply Rubber Base LUNAmoon lining:
- It is best to apply with a flat brush for gel, the movements should be rubbing, it is important to paint all nail grooves.
- Dry in the lamp for 60 seconds.
8. Remove stickiness.
9. Apply Jelly Gelly extension gel to the stress area of the nail and pull it to the free edge, completely modeling the shape of the free edge, you need to look at the nail from the side and make sure that the top line of the gel droplet aligns with the biting free edge.
10. Dry for 120 seconds.
11. File, removing all irregularities, making sure to align all lateral parallels and create clear lateral lines of the nail and cuticles (if doing restoration).
12. It is recommended to paint the areas with base again, where filing was done, as filing may have removed the bottom lining from Rubber Base, which can cause delamination because there will be gel on top that does not adhere to the natural nail: gently brush over with a gel brush base and dry for 60 seconds.
13. Levelling can be done with liquid acrylic gel or base, but it is necessary to leave a gap of 0.5-1 mm from the cuticle, dry in the lamp for 120 seconds.
14. File the form after leveling to create a thickness on the end that will hold the free edge.
15. It is necessary to file the natural nail for better wear; if this is not done, there will be delamination at the free edge.
16. After filing, remove stickiness.
17. Apply gel polish if necessary.
18. Apply LUNAmoon TOP and dry for 120 seconds.
19. After drying, do not wipe with anything, otherwise, the gloss may be lost.
IMPORTANT:
If working with removers, wash hands with soap and water after use.
